314 the twin u-slots (idc slots), the 3-point insulation grip, and the distortion resistant disconnectable construction ensure a reliable connection even during severe environmental conditions. features ?compact only 5.5mm (.217") high and 3.5mm (.138") thick. ?twin u-slot insulation displacement section the insulation displacement section connected to each wire consists of two tin-plated slots (twin u-slots), which ensures reliable connection. ?3-point grip construction the 3-point insulation grip feature and the strain relief ensure a firm grip on terminated wires and protection of the insulation displacement connection from possible damage. ?distortion resistant construction the header is fully shrouded and thus protects the receptacle from damage that could be caused by mating the connectors at an angle or otherwise mismating the connectors. ?compatible with the zh crimp style connector the same shrouded header can be used for either the zr idc- type connector or the zh crimp-style connector. this allows both types of connector to be used interchangeably without replacing the header. specifications ?current rating: 0.7a ac, dc (awg #28) ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/20m ? max. after environmental testing/30m ? max. ?insulation resistance: 500m ? min. ?withstanding voltage: 500v ac/minute ?applicable wire: ul1571(contact jst regarding other ul styles.) awg #30, #28 conductor/7 strands, tin-coated insulation o.d./0.7 to 0.8mm(.028" to .031") (contact jst for diameters greater than 0.8mm(.031").) ?applicable pc board thickness: 0.6 to 1.2mm(.024" to .047") * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 r9351092 zr connector disconnectable insulation displacement connectors 1.5mm (.059") pitch idc emboss tape
315 receptacle jst a 4.4(.173) 3.1(.122) 2.7(.106) 4.1(.161) b 1.5 (.059) 1.5 (.059) cir- cuits model no. dimensions mm(in.) awg #28 (green) awg #30 (natural/gray) ab q'ty / box material and finish 2 3 4 5 6 7 8 9 10 11 12 13 02zr-3h 03zr-3h 04zr-3h 05zr-3h 06zr-3h 07zr-3h 08zr-3h 09zr-3h 10zr-3h 11zr-3h 12zr-3h 13zr-3h 02zr-8m 03zr-8m 04zr-8m 05zr-8m 06zr-8m 07zr-8m 08zr-8m 09zr-8m 10zr-8m 11zr-8m 12zr-8m 13zr-8m 1.5(.059) 3.0(.118) 4.5(.177) 6.0(.236) 7.5(.295) 9.0(.354) 10.5(.413) 12.0(.472) 13.5(.531) 15.0(.591) 16.5(.650) 18.0(.709) 4.5(.177) 6.0(.236) 7.5(.295) 9.0(.354) 10.5(.413) 12.0(.472) 13.5(.531) 15.0(.591) 16.5(.650) 18.0(.709) 19.5(.768) 21.0(.827) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 contact: phosphor bronze, tin/lead-plated housing: glass-filled nylon 66, ul94v-0 shrouded header the shrouded headers are interchangeable with those of the zh crimp style connectors. through-hole type pc board layout (viewed from soldering side) and assembly layout 1.5 note: 1. tolerances are non-cumulative: 0.05mm( .002" ) for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guidel ine. contact jst for details. 3. as for the pc board layout for the smt type shrouded headers, refer to that of the zh connector. top entry type side entry type zr connector
home > product profile |? company profile ? |? j.s.t. network ? |? j.s.t. other websites ? |? products precautions ? |? home zr connector zr connector zr connector zr connector ???? *twin u - slot id section *fully shrouded header *the same shrouded header can be used for the zh cr imp style connector. product profile product profile product profile product profile series zr connector category wire to board insulation displacement connectors type disconnectable type idc style, ultra-compact type specification specification specification specification rohs compliant products are published. (lf)(sn) as identification part number shall be dis played on a label. when ordering rohs compliant products, please inqui re to the nearest jst sales office, or order them with the described part number adding (lf)(sn) as the identification marking after it. further information pitch 1.5 current rating ac/dc 0.7a (awg#28) voltage rating ac/dc 50v available number of circuits 2 to 13 pc board mounting direction top entry, side entry j.s.t. mfg. co., ltd. copyright(c) 1999- 2008 j.s.t. mfg. co.,ltd all rights reserved. page 1 of 1 j.s.t. mfg. co., ltd. 9/25/2008 http://www.jst - mfg.com/product/detail_e.php?series=290
|
